setup-notifications-via-wecom

Setup Notifications via WeCom

Overview

This skill helps you send clear, unambiguous technical notifications through a WeCom group bot webhook.

It covers two things:

1. One-time setup: store the webhook URL, test connectivity, and create a reusable sender script.
2. Send messages: craft messages that distinguish state from delta, define every number, and avoid

the misleading patterns that made earlier backup-sync notifications confusing.

The bundled script scripts/send_wecom.py handles the actual HTTP call, using the host network configuration. Recipient identity is explicit configuration:

self may send automatically; others requires human confirmation; missing identity fails fast.

When to Use This Skill

Trigger this skill when the user:

• Says "send a WeCom notification", "企业微信通知", "企微机器人", or "webhook 通知".
• Wants to set up alerting for a backup, sync, cron job, or service status.
• Asks you to write a status/alert message and you need to make it clear and unambiguous.
• Mentions a message was confusing or misleading and wants it fixed.

Quick Start: Configure the Webhook

1. Check existing config:

   cat ~/.config/setup-notifications-via-wecom/config.json

If it exists and contains webhook_url, skip to [Send a Message](#send-a-message).

1. Get the webhook URL from the WeCom group bot settings. It looks like:

   https://qyapi.weixin.qq.com/cgi-bin/webhook/send?key=YOUR_KEY

1. Store it privately (outside the skill bundle, so it survives updates):

   mkdir -p ~/.config/setup-notifications-via-wecom
   echo '{"webhook_url": "https://qyapi.weixin.qq.com/cgi-bin/webhook/send?key=YOUR_KEY"}' \
     > ~/.config/setup-notifications-via-wecom/config.json
   chmod 600 ~/.config/setup-notifications-via-wecom/config.json

1. Classify the exact target and bind the canonical sender without exposing or rewriting the webhook value:

   uv run --no-project python scripts/set_recipient.py \
     --scope self --label "My private self channel"

Use self only when the configured webhook is visible only to the user. Use

others for every other person or group. Do not guess when the target is unknown.

The command also records this sender's absolute path and digest; after the sender

is upgraded, rerun the command before sending again.

1. Test connectivity by sending a test message (run from the skill directory):

   uv run --no-project python scripts/send_wecom.py --message "WeCom webhook test ✅"

If you see the message in the WeCom group, setup is done.

Message Best Practices

These rules come from real corrections. Apply them to every notification.

1. Headline First

The first line must say what happened. Do not bury the conclusion.

Claude Code 备份同步完成 ✅

2. Distinguish State vs Delta

• State: current totals (e.g., source has 1075 main sessions, backup has 2328).
• Delta: what changed in this run (e.g., 13 main sessions + 230 other files were added since 03:00).

Never say "synced 1075 sessions" if only 13 were new today.

3. Define Every Number

Every count must be accompanied by what it counts. Prefer:

- 源目录主 session：1075 个
- 备份主 session：2328 个

Avoid undefined terms like "session" alone — it may include workflow journals, subagent files, or tool outputs.

4. Use Plain Location Names, Not Jargon

Prefer:

• "电脑上" / "源目录"
• "备份里" / "备份仓库"

Avoid:

• "当前"
• "含历史"
• "旧 session" (unless defined)

5. Omit Noise

Do not include commit hashes, file paths, internal documentation references, or verbose explanations unless the user explicitly asks for them.

6. Be Technically Precise, Not Condescending

Use correct technical terms and define them. Do not translate everything into "大白话" simplifications that hide precision.

7. Include Verification Metrics

When the user asked "does it miss anything?", answer directly:

- 验证：0 缺失，0 滞后

8. End with a Next Action

Tell the user whether they need to do anything:

- 下一步：无需操作，下次自动同步 03:00

Notification Templates

Backup Sync Completion

Use when a backup/sync job finishes and you need to report completeness.

Claude Code 备份同步完成 ✅

- 自动同步：今日 03:00 正常执行
- 本次手动同步：补充 03:00 后的增量
  - 主 session：13 个
  - 子代理/工具输出/工作流：230 个
  - 合计：243 个文件
- 验证：0 缺失，0 滞后
- 当前状态：
  - 源目录主 session：1075 个
  - 备份主 session：2328 个
- 下一步：无需操作，下次自动同步 03:00

Alert

Use when something requires immediate action. Do not use this template for routine "all good" updates.

🚨 [P?] [服务/任务名] [症状]

- 影响：[谁/什么受影响，程度如何]
- 严重程度：[P1–P5 等级]
- 开始时间：[YYYY-MM-DD HH:MM TZ]
- 已采取：[正在做的动作]
- 下一步：[建议动作或预计下次更新时间]
- 相关链接：[dashboard/runbook，可选]

Rules:

• Alert on symptoms, not causes (e.g., "API error rate > 10%" not "CPU 99%").
• If the recipient cannot do anything concrete, do not send it as an alert.
• Be honest about uncertainty; do not guess at root cause.

Status Update

Use for routine "all good" updates.

[任务名] 状态正常 ✅

- 检查时间：2026-06-24 03:00 CST
- 关键指标：
  - 源目录主 session：1075 个
  - 备份主 session：2328 个
- 本次变更：无
- 下一步：无需操作

Send a Message

Read recipient_scope and recipient_label before sending. A self target is

the user's own delivery channel and needs no authorization. An others target

is an external send: show the exact label and message and wait for the active

human-confirmation gate. Missing/invalid metadata is a configuration error, not

permission to guess.

Option A: Use the bundled script directly

uv run --no-project python scripts/send_wecom.py \
  --message "你的消息内容"

For multiline messages, use a file:

cat > /tmp/wecom_msg.txt <<'EOF'
Claude Code 备份同步完成 ✅

- 验证：0 缺失，0 滞后
EOF

uv run --no-project python scripts/send_wecom.py \
  --file /tmp/wecom_msg.txt

Option B: Inline curl

If you prefer not to use the script:

curl -s -X POST 'https://qyapi.weixin.qq.com/cgi-bin/webhook/send?key=YOUR_KEY' \
  -H 'Content-Type: application/json' \
  -d '{
    "msgtype": "text",
    "text": {
      "content": "YOUR_MESSAGE"
    }
  }'

Network: Inherit the host/project HTTP(S) proxy and no_proxy policy. A required proxy must remain in use; do not infer a direct-connect requirement from the Tencent domain. Configure an HTTP(S) proxy explicitly when the host requires one: Python urllib does not implement generic SOCKS ALL_PROXY routing.

After upgrading the sender, refresh its configured digest using the existing

set_recipient.py workflow, preserving the same scope and label. Do not relabel

a group as self merely to pass the guard.

Workflow: Add WeCom Notification to a Script

When a user asks "let my backup script send WeCom notifications", do the following:

1. Confirm the webhook is configured (see Quick Start).
2. Read the explicit recipient scope/label; auto-send only when scope is self.
3. Identify the notification type (backup-complete, alert, status-update, custom).
4. Collect the exact numbers and their definitions from the script output.
5. Craft the message using the templates above.
6. For others, obtain human confirmation; then call scripts/send_wecom.py.
7. Verify the message arrived at the configured target.

What This Skill Does NOT Do

• It does not create or manage WeCom group bots — get the webhook key from WeCom first.
• It does not infer who a webhook reaches — classify the target explicitly with set_recipient.py.
• It does not handle rich media messages (markdown cards, news, images) — only plain text.
• Manual --message / --file sends retry transient errors up to 3 times. Guard-owned

automatic --outbox delivery makes exactly one HTTP attempt and requires the

guard-approved payload digest; a later run never sends a pre-existing payload.

• It does not change host proxy configuration or switch routes automatically after a failure.

Troubleshooting

Connection closed or timeout

Inspect the configured route without printing proxy credentials. Follow the host's

approved direct/proxy policy and diagnose the failing connection on that route.

Do not silently clear proxies, try another endpoint, or replay an ambiguous send.

Message not received, but curl returned 200

Check the response body: HTTP 200 with nonzero errcode is failure. errcode=0 means API acceptance, not recipient receipt. Verify the intended group and message where receipt matters. A direct bot test cannot validate an SLS/other scheduler: exercise and inspect that native path separately within the authorized test count.

Config file not found

Run the setup step again. The script expects ~/.config/setup-notifications-via-wecom/config.json with a webhook_url field.

References

• references/message_best_practices.md — condensed checklist distilled from this session's corrections.
• scripts/send_wecom.py — the sender script.
• scripts/set_recipient.py — atomically records self versus others plus the canonical sender path/digest without printing the webhook.