ieee-transactions-on-antennas-and-propagation

IEEE Transactions on Antennas and Propagation (ieee-transactions-on-antennas-and-propagation)

Journal positioning

IEEE Transactions on Antennas and Propagation (TAP), published by the IEEE

Antennas and Propagation Society, is a flagship archival venue for **antennas,

applied electromagnetics, and wave propagation**: antenna design and analysis,

electromagnetic theory, scattering and diffraction, computational EM,

metamaterials and metasurfaces for EM, and propagation/channel characterization.

The defining expectation is a genuine antenna or electromagnetics contribution

supported by the field's standard evidence chain — sound theory or formulation,

validating full-wave simulation, and, for most antenna papers, fabricated-prototype

measurement. Papers whose real contribution is a circuit, a communications

system, or an algorithm, with the antenna present only as a component, are a poor

fit. This skill is a fit / venue-selection / re-framing tool. It does not

replace the journal's current official author information. Before submitting,

re-check the live IEEE TAP author guidance and submission system.

When to trigger

• The author names TAP for an antenna, applied-EM, scattering, or propagation

manuscript and wants a fit/framing check.

• A design must be re-framed so the electromagnetic contribution — not the

downstream system or circuit — is the headline.

• The author is unsure whether a metamaterial/metasurface result belongs in TAP

(EM functionality) or an optics/materials venue.

• The author needs TAP's measurement-validation bar and desk-reject heuristics.

Scope & topic fit

• Antenna design and analysis: arrays, wideband/multiband, electrically small,

reconfigurable, mm-wave/THz, on-chip and integrated antennas, with a new principle

or performance advance.

• Electromagnetic theory and methods: analytical formulations, Green's functions,

and computational EM (MoM, FEM, FDTD, FMM) when the contribution is the method or insight.

• Scattering, diffraction, and inverse scattering; radar cross-section; rough-surface

and random-media interaction.

• Metamaterials, metasurfaces, frequency-selective surfaces, and engineered EM

media when the advance is an electromagnetic functionality (not just a material).

• Wave propagation and channel modeling grounded in electromagnetics: terrestrial,

indoor, ionospheric, and near-field propagation phenomena.

• Antenna measurement techniques, near-field/far-field transformation, and

characterization methodology.

Method & evidence bar

• The standard evidence chain is **theory/formulation → full-wave simulation →

measurement**; most antenna papers require a fabricated prototype with measured

results, not simulation alone.

• Report simulation setup fully: solver, mesh/convergence, boundary conditions, and

excitation — and reconcile measured vs. simulated results, explaining discrepancies.

• Measurements must include the relevant antenna metrics under stated conditions:

S-parameters, realized gain/efficiency, radiation patterns (co/cross-pol), bandwidth.

• For theory/computational-EM papers, validate against canonical analytical solutions

or reference results and quantify accuracy and cost.

• Benchmark against the closest prior antenna/EM designs on the metrics that matter

(size, bandwidth, gain, efficiency, polarization), not a strawman.

• The electromagnetic mechanism (resonance, mode, surface-wave, coupling) must be

explained, not just reported as a working geometry.

Structure & house style

• IEEE double-column format; TAP publishes full Papers and shorter

Communications — match the article type to the contribution and re-check

current definitions and length policy on the live guide.

• The introduction motivates the EM/antenna gap and states the contribution; avoid

framing the paper around a communications-system application the antenna merely serves.

• Figures are load-bearing: geometry with dimensions, simulated/measured S-parameters,

radiation patterns, current/field distributions illustrating the mechanism.

• Include a fabrication photo and the measurement configuration for prototype papers.
• Keep system/link-level material proportionate; the paper stands on its EM contribution.

Official-submission checklist

• Before giving submission-ready advice, read ../../resources/source-basis.md and

../../resources/official-source-map.md; start from the IEEE Author Center

anchors, then cite the current TAP-specific page you checked.

• Search the live site for "IEEE Transactions on Antennas and Propagation information

for authors" and follow the current ScholarOne/IEEE version.

• Re-check article types (Paper vs. Communication), page/length limits and overlength

policy, and the IEEE double-column template.

• Confirm expectations on measurement data, simulation reproducibility, and any

supplementary material.

• Re-check ORCID, competing-interests, funding, author-contribution, and AI-use

disclosure requirements, and IEEE open-access options.

• If the live official instructions conflict with this skill, the official

instructions win.

Pre-submission self-check

• [ ] The headline contribution is an antenna/electromagnetics advance, not a circuit, system, or algorithm.
• [ ] The evidence chain is complete: theory/formulation, full-wave simulation, and (for antennas) measured prototype.
• [ ] Measured and simulated results are reconciled, with discrepancies explained.
• [ ] The EM mechanism (mode/resonance/coupling) is explained, not just a working geometry shown.
• [ ] Performance is benchmarked against the closest prior designs on the right metrics.
• [ ] Article type (Paper vs. Communication) and length fit current TAP limits.

Common desk-reject triggers

• Antenna design with simulation only and no measurement, with no justifying reason.
• A circuit, RF front-end, or communications-system paper where the antenna/EM contribution is incidental.
• Incremental geometry variation with marginal, unbenchmarked improvement and no new EM insight.
• Computational-EM paper with no validation against canonical or reference solutions.
• Scope mismatch: a pure photonics/optics, pure materials, or pure signal-processing paper labeled "EM."

Re-routing decision

• Communications-system or link-level contribution as the core → an IEEE communications venue.
• Microwave circuits, filters, or active RF front-ends as the core → ieee-transactions-on-microwave-theory-and-techniques.
• Optical/photonic metasurface or device physics as the core → optica.
• Signal processing (beamforming, DOA, array processing) as the core → ieee-transactions-on-signal-processing.
• Materials-science advance of the metamaterial itself → a materials venue.

Output format

[Fit] High / Medium / Low (one-line reason)
[Target] IEEE Transactions on Antennas and Propagation
[Topic tags] <2–3 closest antenna/EM subtopics>
[EM contribution] <the antenna/electromagnetics advance in one line>
[Method/evidence] <does theory + simulation + measurement clear TAP's validation bar?>
[Top risk] <the single most likely reason for rejection>
[Article type] Paper / Communication
[Official items to re-check] <article type / length / template / measurement-data / disclosures>
[Re-route suggestion] <if not a fit, a better-matched venue>